• Airframe and Powerplant Technician GRR-MRO

    Signature Aviation (Grand Rapids, MI)
    …to perform engine run and taxi on multiple aircraft as well perform basic engine rigging , flight control rigging , be able to communicate with customers, ... + Inspect work performed + Complex troubleshooting of aircraft systems + Complex engine and flight control rigging + Engine run and taxi + Must work well as… more
    Signature Aviation (05/02/24)
    - Save Job - Related Jobs - Block Source
  • Airframe and Powerplant Technician II FAT-MRO

    Signature Aviation (Fresno, CA)
    …to perform engine run and taxi on multiple aircraft as well perform basic engine rigging , flight control rigging , be able to communicate with customers, ... + Inspect work performed + Complex troubleshooting of aircraft systems + Complex engine and flight control rigging + Engine run and taxi + Must work well as… more
    Signature Aviation (03/13/24)
    - Save Job - Related Jobs - Block Source
  • Marine Technician II 03422 Lbyd Federal

    North Wind Group (San Diego, CA)
    …& repairs to mechanical & hydraulic steering systems. + Perform complete boat engine rigging , fuel systems, electrical systems, and ignition systems. ADDITIONAL ... inflatable boat repair/service + 5 years of experience with maintaining and rigging commercial/gov't utility boats. + 12v electrical systems + Familiar with… more
    North Wind Group (05/07/24)
    - Save Job - Related Jobs - Block Source
  • A&P Mechanic OCONUS

    Leidos (VA)
    …+ Turbine engine , propeller, airframe and flight control/landing gear or engine rigging + Track and perform scheduled and unscheduled aircraft maintenance, ... repair and inspections on all aircraft systems **WHAT SETS YOU APART (basic qualifications)** + High School Diploma or equivalent and three (3) years of prior relevant experience. + Current FAA A&P License + Must be able to obtain and maintain an interim DOD… more
    Leidos (05/21/24)
    - Save Job - Related Jobs - Block Source
  • Mechanic Team Lead-A&P

    Gulfstream (Savannah, GA)
    …and heavy maintenance (ie Aircraft component removal and installation, flight control rigging , engine removal, installation, rigging , schedule and ... in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance… more
    Gulfstream (05/15/24)
    - Save Job - Related Jobs - Block Source
  • Propulsion Engine Integration Assembler…

    The Boeing Company (North Charleston, SC)
    …the following areas; locating parts and assemblies; installation of nacelle and engine components, electrical testing of systems, rigging of nacelle components, ... with us. Boeing Commercial Airplanes (BCA) is currently seeking an **Propulsion Engine Integration Assembler (Level B)** to join the **Propulsion Team** in **North… more
    The Boeing Company (04/14/24)
    - Save Job - Related Jobs - Block Source
  • Aircraft Mechanic I - A&P

    AAR (Oklahoma City, OK)
    …heavy maintenance tasks with little supervision + Perform flight control and engine throttle rigging + Perform aircraft maintenance, repair, and troubleshooting ... tasks + Ensure aircraft are safely maintainedin accordance with the Airworthiness Standards + Use FAA approved/accepted data (ie, IPC, M/M, OHM, SRM) proficiently + Maintain records in compliance with FAA and company requirements + Perform airframe repairs as… more
    AAR (05/04/24)
    - Save Job - Related Jobs - Block Source
  • Technician I - A&P

    AAR (Indianapolis, IN)
    …tasks without supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES + Perform flight control and engine throttle rigging . + Able to use FAA approved data (ie ... IPC, M/M, OHM, SRM) proficiently. + Insure work performed adheres to high quality standards. + Effectively direct the work of less experienced mechanics. + All other duties as assigned. CORE COMPETENCIES + Commitment to company values and ethics +… more
    AAR (04/16/24)
    - Save Job - Related Jobs - Block Source
  • Technician I, A&P (Licensed)

    AAR (Rockford, IL)
    …tasks without supervision. **ESSENTIAL DUTIES AND RESPONSIBILITIES** + Perform flight control and engine throttle rigging . + Able to use FAA approved data (ie ... IPC, M/M, OHM, SRM) proficiently. + Insure work performed adheres to high quality standards. + Effectively direct the work of less experienced mechanics. + All other duties as assigned. **CORE COMPETENCIES** + Commitment to company values and ethics. +… more
    AAR (03/05/24)
    - Save Job - Related Jobs - Block Source
  • Qualified Member Of The Engine Department…

    Louisiana Department of State Civil Service (LA)
    QUALIFIED MEMBER OF THE ENGINE DEPARTMENT (QMED) Print (https://www.governmentjobs.com/careers/louisiana/jobs/newprint/4429758) Apply  QUALIFIED MEMBER OF THE ... ENGINE DEPARTMENT (QMED) Salary Depends on Qualifications Location Out...of alarms, emergency equipment and pumps. + Conduct marine rigging of wire rope and connecting gear. + Managing… more
    Louisiana Department of State Civil Service (03/14/24)
    - Save Job - Related Jobs - Block Source
  • A&P Mechanic

    Leidos (Fort Bliss, TX)
    …scheduled and unscheduled aircraft maintenance, inspection, troubleshooting and repair. + Perform rigging of engine , propeller, flight, and landing gear systems ... + Troubleshoot malfunctioning mechanical, electrical and avionics systems and provide effective solution. + Document work performed on appropriate forms and in electronic systems acceptable to the administrator. + Provide signature of certification of the work… more
    Leidos (05/16/24)
    - Save Job - Related Jobs - Block Source
  • Temporary Deckhand - Halstead Fleet

    University of Southern Mississippi (Ocean Springs, MS)
    …VHF radio, orally, or sound/hand signals. + Operates winches, A-frames, and trawls; performs engine room checks and rigging . + Assists scientific crews with safe ... and efficient gear deployments and retrievals to include nets, CTDs, and other necessary equipment. + Assists passengers as needed and helps oversee general safety of those on board vessel. + Serves as a deckhand on other university vessels as needed. Performs… more
    University of Southern Mississippi (04/05/24)
    - Save Job - Related Jobs - Block Source
  • Small Engine Mechanic

    Hoffman Construction Company (Portland, OR)
    …Experience: + Minimum of one (1) of year of professional experience in small engine repair Position Related Skills + Current certification or the ability to become ... to become Aerial Lift certified; + Training and certification available + Current rigging signaling certification, or the ability to become certified + Training and… more
    Hoffman Construction Company (04/23/24)
    - Save Job - Related Jobs - Block Source
  • Skilled Trade - Millwright - Lima Engine

    Ford Motor Company (Lima, OH)
    …in machine fabrication, installation and alignment, field machining, lifting and rigging , steel fabrication, conveyor systems, blue print reading and sketching. ... Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified… more
    Ford Motor Company (05/08/24)
    - Save Job - Related Jobs - Block Source
  • SCA Aircraft Mechanic 2 (SkillBridge)

    Northrop Grumman (Robins AFB, GA)
    …and aircraft RVSM certification. + Experienced in flight control and landing gear rigging and operational checks. Engine run qualified and APU run qualified. ... parts replacement, line repairable unit (LRU) replacement, calibration tasks, testing, engine repairs and/or replacements & proper documentation in aircraft forms… more
    Northrop Grumman (05/18/24)
    - Save Job - Related Jobs - Block Source
  • SCA Aircraft Mechanic 2 - Multiple Shifts - Secret

    Northrop Grumman (Robins AFB, GA)
    …and knowledgeable on FAA RVSM guidelines Experience in flight control and landing gear rigging and operational checks. Engine run qualification and engine ... parts replacement, line repairable unit (LRU) replacement, calibration tasks, testing, engine repairs and/or replacements & proper documentation in aircraft forms… more
    Northrop Grumman (05/18/24)
    - Save Job - Related Jobs - Block Source
  • SCA Aircraft Mechanic 2 - Multiple Shifts - Secret

    Northrop Grumman (Robins AFB, GA)
    …and knowledgeable on FAA RVSM guidelines Experience in flight control and landing gear rigging and operational checks. Engine run qualification and engine ... parts replacement, line repairable unit (LRU) replacement, calibration tasks, testing, engine repairs and/or replacements & proper documentation in aircraft forms… more
    Northrop Grumman (05/18/24)
    - Save Job - Related Jobs - Block Source
  • Aircraft Maintenance C - A&P Mechanic 1

    L3Harris (Tucson, AZ)
    …to: scheduled/unscheduled aircraft maintenance on all aircraft systems; turbofan engine , airframe, flight control/landing gear rigging , troubleshooting systems, ... daily/turnaround inspections, perform corrosion inspections and related treatment, washing/cleaning, servicing aircraft fuel/oil/hydraulic/oxygen/nitrogen systems, Structural repairs and component in-house repair/back shop programs. The aircraft mechanic… more
    L3Harris (05/16/24)
    - Save Job - Related Jobs - Block Source
  • Aircraft Mechanic (Electrician): North Island

    Amentum (San Diego, CA)
    …and rebuilds all aircraft systems to include aircraft structure system, engine /gearbox/rotor system, all avionic systems. Blades and fuselage, and functional ... components including rigging , surface controls, and plumbing and hydraulic units, ensuring...areas, distortions, security, warping, wear, and missing segments. Inspects engine turbine blades to detect cracks, distortion, corrosion, burn-out,… more
    Amentum (05/17/24)
    - Save Job - Related Jobs - Block Source
  • Test Technician - 2nd shift

    GE Vernova (Houston, TX)
    …stands, engine cans, pallets + Overhead cranes and install crane- rigging systems, as well as, operate industrial forklifts, bobcat, ladders, man-lifts, ... of the duties of a Turbine Technician + Perform engine installation into cell, assuring completeness and correctness of...Perform complete mechanical and operational acceptance test on all engine /package models. Adjust engine controls, such as… more
    GE Vernova (05/10/24)
    - Save Job - Related Jobs - Block Source