- Magna (Carrollton, GA)
- Mold Setter (2nd & 3rd Shift ) Job Number: 66246 Group: Magna Exteriors Division: Decostar Georgia Job Type: Permanent/Regular Location: Carrollton, GEORGIA, ... **About the Role** This position reports directly to the Shift Team Leader/ Supervisor and is responsible for the...Molding Tools as per set up sheet, check Injection Mold after production run for damage, and note those… more
- Parker Hannifin Corporation (Lynchburg, VA)
- Blueline Mold Tech - Third Shift ...Description Apply Now > Save JobJob Saved The Blueline Mold Technician is responsible for operation and production ... machine set up and changes in production. The Blueline Mold Technician is responsible for following all...for keeping work area clean and organized both during shift and at the end of shift … more
- Aerotek (Bellevue, OH)
- **Description:** The Mold Technician will have the following responsibilities: + Check with previous shift to verify production schedule and current process ... parameters. + Check production schedule for mold and/or material changes + Responsible for checking and...environment + Experience with hand/power tools **This position is 3rd shift from 10:30pm-7:00am, Monday through Friday… more
- PeopleReady (St. Croix Falls, WI)
- Mold Technician PeopleReady of Saint Croix Falls, WI...a safe manner Available shifts: Shift Timings: 1st Shift (Day) and 3rd Shift (Night) ... $14.50 / hour What you'll be doing as a Mold Technician : * Read and follow job...product. * Responsible for keeping accurate scrap counts throughout shift * Communicate any information to oncoming shift… more
- Randstad US (Grandview, MO)
- machine and mold repair technician . + grandview , missouri + posted 7 days ago **job details** summary + $62,000 - $72,800 per year + permanent + high school + ... Technician with expertise in both machine maintenance and mold repair to join our dynamic team. As a...maintaining production efficiency. salary: $62,000 - $72,800 per year shift : Third work hours: 12 AM -… more
- Aerotek (Pulaski, TN)
- Mold Technician will be responsible for...checks to validate process capabilities. Hiring on 2nd and 3rd shift . Please apply with interest. **About ... any defects. Must communicate this with process techs and maintenance group. Responsible for mold and material changes as needed or required. Must be able to perform… more
- Altium Packaging (Thomasville, NC)
- Location Address: 1408 Unity Street, Thomasville, North Carolina 27360 Work Shift : 8hr- 3rd Shift (United States of America) Altium Packaging, Our Culture ... in your Work As a fully competent Industrial Maintenance Technician , incumbent will perform repairs, preventive and corrective maintenance...to the following: + Must be able to work Third Shift + Ensure compliance with corporate… more
- ITW (Hebron, IL)
- …of disposable diagnostic imaging consumables. **This position qualifies for a shift differential.** **Duties and Responsibilities:** + Mold changeovers ... action. + Preventative maintenance of injection molds by performing scheduled mold inspection which includes the disassembly, cleaning, and reassembly of intricate… more
- Altium Packaging (Harvard, IL)
- Location Address: 875 W Diggins Street, Harvard, Illinois 60033 Work Shift : 8hr- 3rd Shift 10p-6:30a Harvard (United States of America) Altium Packaging, Our ... Fulfillment in your Work As a fully competent Industrial Maintenance Technician , incumbent will perform repairs, preventive and corrective maintenance on production… more
- Randstad US (Shelbyville, TN)
- 3rd shift maintenance technician . + shelbyville ,...is you, please today! salary: $46,000 - $66,000 per year shift : Third work hours: 12 AM - 8 AM ... is looking for an experienced Industrial Maintenance Manager, with an injection mold background, for a very well established Shelbyville facility. If this… more
- ITW (Hebron, IL)
- …provider of disposable diagnostic imaging consumables. **This position qualifies for a shift differential.** + Setup of automation presses or assembly machines. + ... + Maintain, troubleshoot, and repair various assembly, automation, and mold equipment. + Perform preventative maintenance tasks and fill...standing. Must be able to stand for a full shift (8 hours). + Ability to lift to 50… more
- Altium Packaging (Lebanon, IN)
- Location Address: 917 Edwards Drive, Lebanon, Indiana 46052 Work Shift : 8hr- 3rd Shift (United States of America) Altium Packaging, Our Culture Differentiates ... + Seeking Fulfillment in your Work The Production Line Technician will ensure the process is in accordance with...configurations; + Troubleshoot and locate root problems and repair blow- mold , baggers and other equipment; + Operate blow- mold… more
- ICU Medical (Southington, CT)
- …not be discriminated against on the basis of disability. **Title:** *Production Technician - 3rd Shift * **Location:** *CT-Southington* **Requisition ID:** ... Temp to Hire - 4 openings The Assembly Technician is responsible for ensuring the correct operation...machine shop, piping systems, pneumatics, and welding. . Complete shift start up paperwork such as process parameter, traceability,… more
- Aerotek (Columbus, OH)
- AIS is looking for an industrial maintenance technicians for 3rd shift , preferably experience working on blow mold machines. Candidates need to have ... industrial maintenance experience working on both mechanical and electrical issues. **Job Duties:** + Responsible for all aspects of lubrication of production equipment, support equipment, and facility. + Perform mechanical, electrical and/or preventive… more
- Flexan (Lincolnshire, IL)
- …well as custom compounding and molding for precision parts. The Maintenance Technician is responsible for mold /extrusion changes, set-up & process ... Identify defects and make adjustments. DUTIES AND RESPONSIBILITIES + Sets up, mold /extrusion changes and processing. Assists in start-up of jobs to meet the… more
- Whirlpool Corporation (Ottawa, OH)
- …summary** **Whirlpool is currently seeking qualified candidates for a Tool and Die Technician , at our Ottawa Manufacturing Plant. The onsite pay rate for this role ... in a team environment** + **Locate, trouble - shoot and correct die and mold problems** + **Flexibility to work long hours and other work schedules as needed**… more
- ITW (Bryan, OH)
- …condition (ie equipment not functioning normally) to the Production Supervisor or Mold Technician . 7. Responsible for ensuring product quality through ... and reasoning ability. Individual must be able to stand for full manufacturing shift , have ability to complete hand assembly process. Ability to reach with arms… more
- Aerotek (Riverside, MO)
- …mold , & plastics manufacturing experience is a bonus. **Pay and Shift :** 2nd shift is 1:30pm-10pm 3rd shift is 9:30pm-6am. Pay differs from 21-27$/hr ... **SET-UP TECHNICIAN /MAINTENANCE TECHNICIAN ** **22+$/HR** **IMMEDIATE INTERVIEWS** **Description:**...weekly preventative maintenance on machines & tools. Set up mold equipment for production runs. Quality checks and reporting… more
- Aerotek (Portage, MI)
- …corrective maintenance on blow molds, plastic injection molds and weld fixtures on 3rd shift . Repairs not limited to hydraulic, pneumatic, electrical, and custom ... the corrective action on problem/issues with plastic injection molds **Schedule/Benefits:** + 3rd shift with opportunity for overtime + Competitive pay based… more
- Aerotek (Grand Rapids, MI)
- …2nd Shift - 3pm-11pm - working weekends $28-$34/hr depending on experience 3rd Shift - 11pm- 7am - working weekends $28-$34 depending on experience ... to improve process ADVANCED Level III (LEAD): * Works directly with shift manager to plan mold change/ color change events * Daily direction of Tech Support… more