• Mechanical Engineer

    US Army Joint Munitions Command (Crane, IN)
    …produced in large quantity production runs. Serves as the authoritative technical engineer by providing the analysis and solution of formulation, material, or ... process problems. Provides management controls which include a review of daily production reports,...which include a review of daily production reports, Process Control data, Quality Assurance inspection report, customer order, and… more
    US Army Joint Munitions Command (09/20/24)
    - Save Job - Related Jobs - Block Source
  • Junior Electrical Engineer

    CACI International (Crane, IN)
    Junior Electrical Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel ... * * * **CACI is seeking a Junior Electrical Engineer to support our customer at NSWC Crane.** **What...project meetings as assigned. + Project coordination and Document Control , to include responsibility for generation and review of… more
    CACI International (09/23/24)
    - Save Job - Related Jobs - Block Source
  • Electrical Engineer

    UIC Government Services and the Bowhead Family of Companies (Crane, IN)
    …and engineering support services to theStrategic Systems Guidance, Navigation and Control Division.The Electrical Engineer will be responsible for designing, ... **Overview** ELECTRICAL ENGINEER (GXP 2024-21444) Bowhead seeks a mid-level Electrical...+ Providing technical and engineering support for strategic fire control and navigation systems design, design review, performance and… more
    UIC Government Services and the Bowhead Family of Companies (08/30/24)
    - Save Job - Related Jobs - Block Source
  • Senior Mechanical Engineer

    SAIC (Crane, IN)
    **Description** SAIC is looking for a **Mechanical Engineer ** in **Crane, IN** to support the US Navy. **JOB DESCRIPTION** This position will provide mechanical ... viability. + Engineering support and requirements development for electrical, mechanical, controls and mitigation solutions for the identified system and the… more
    SAIC (09/06/24)
    - Save Job - Related Jobs - Block Source
  • Senior Electrical Engineer

    SAIC (Crane, IN)
    **Description** SAIC is looking for an **Electrical Engineer ** in **Crane, IN** to support the US Navy. **JOB DESCRIPTION** This position will provide electrical ... viability. + Engineering support and requirements development for electrical, mechanical, controls and mitigation solutions for the identified system and the… more
    SAIC (07/23/24)
    - Save Job - Related Jobs - Block Source
  • Cybersecurity Engineer (Assessor)

    Amentum (Crane, IN)
    Amentum is currently seeking a qualified candidate to serve as Cybersecurity Engineer to support key programs at NSWC Crane and throughout the United States. **Job ... produce a cyber-resilient security design solution . + Ensure appropriate security controls are in place that will safeguard digital files and electronic… more
    Amentum (09/24/24)
    - Save Job - Related Jobs - Block Source
  • Senior Engineer , Sustaining

    Cook Medical (Spencer, IN)
    Overview Senior Engineer , Sustaining, will perform activities related to sustaining commercially available products. These activities may include (but are not ... analysis, regulatory approval support, and product/process improvements. The Senior Engineer works independently with limited supervision on complex activities and… more
    Cook Medical (08/29/24)
    - Save Job - Related Jobs - Block Source
  • Mechanical Engineer

    ManTech (Crane, IN)
    …our **Navy Aviation Division** is seeking a motivated, career and customer-oriented **Mechanical Engineer ** to join our team in the **Crane, IN** . This is ... such as requirements definition, verification and validation testing, interface control documents (ICDs) and systems engineering management plans (SEMP) **Clearance… more
    ManTech (08/31/24)
    - Save Job - Related Jobs - Block Source
  • Electronic Engineer Counter Small Unmanned…

    Precise Systems, Inc. (Crane, IN)
    …exceptional service and the Precise solution. Precise Systems is seeking an Electronic Engineer to join our team at the Naval Surface Warfare Center in Crane, ... IN. The Electronic Engineer will be a Counter small Unmanned Aerial Systems...Zynq MPSoCs / RFSoCs) + Hardware peripheral programming and control for both digital and analog devices + Deployment… more
    Precise Systems, Inc. (08/16/24)
    - Save Job - Related Jobs - Block Source
  • Senior Flight Test Engineer

    SAIC (Crane, IN)
    **Description** SAIC is seeking a talented **Flight Test Engineer ** to support NSWC Crane and the Conventional Prompt Strike (CPS) Hypersonic weapons system program. ... system redundancy, and fault/failure detection & accommodation methods, and configuration control processes. + Skill & ability to utilize simulation, when… more
    SAIC (09/25/24)
    - Save Job - Related Jobs - Block Source
  • Electrical Engineer

    CACI International (Crane, IN)
    Electrical Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: ... Documents (SRDs), Performance Specifications, (P-Spec), Design Specifications, and Interface Control Documents (ICDs). You will support development and execution of… more
    CACI International (08/23/24)
    - Save Job - Related Jobs - Block Source
  • Sr Electrical Engineer

    SAIC (Crane, IN)
    **Description** SAIC is seeking a **Defense Sr. Electrical Engineer ** with strong DSP, FPGA, and VHDL design skills to join our team in Crane, IN. The selected ... to root cause + Develop new designs and fabricate prototypes + Work on Change Control Board (CCB) to evaluate bugs and feature enhancements + Review VHDL code of… more
    SAIC (09/07/24)
    - Save Job - Related Jobs - Block Source
  • Systems Engineer Principal

    SAIC (Crane, IN)
    **Description** SAIC is seeking a **Systems Engineer Principal** to support NSWC Crane Strategic Systems Hardware Division (GXW) in standing up the Navy Conventional ... provide technical support and drawing reviews. + Review and update equipment installation control drawings (ICDs) + Support planning for Navy Training and manning +… more
    SAIC (09/06/24)
    - Save Job - Related Jobs - Block Source
  • RF Field Test Engineer

    SAIC (Crane, IN)
    **Description** SAIC is looking for a **RF Field Tech Engineer ** to support the US Navy in **Crane, IN** . **JOB RESPONSIBILITIES:** + Test and Evaluation (T&E) ... operational aspects of electronic warfare. + Knowledge of jammer system control and signal processing algorithms, "precision" passive detection and tracking… more
    SAIC (08/15/24)
    - Save Job - Related Jobs - Block Source
  • LABVIEW Electrical Engineer

    SAIC (Crane, IN)
    **Description** SAIC is seeking for an **Electrical Engineer ** with **LABVIEW** experience in Crane, IN. JOB RESPONSIBILITES: + Candidate's duties will include ... equipment and systems; circuitry components; analog and digital computers; and control and test equipment. + Conducts experimental tests on equipment and… more
    SAIC (08/02/24)
    - Save Job - Related Jobs - Block Source
  • Senior Level Model Based Systems Engineer

    Amentum (Crane, IN)
    …a broad range of domains. We are hiring an MBSE Model Based Systems Engineer to support key programs at NSWC Crane. **RESPONSIBILITIES** + Thorough understanding of ... models and approve models for baselining + Manage and maintain configuration control of all approved models, simulation, and analysis products and all versioning… more
    Amentum (06/27/24)
    - Save Job - Related Jobs - Block Source
  • Software Developer

    ManTech (Crane, IN)
    …our **Navy Aviation Division** is seeking a motivated, career and customer-oriented **Software Engineer ** to join our team in the **Crane, IN** . This is **onsite** ... systems engineering + Strong PowerShell scripting skills + Experience with technical compliance controls , STIGs, or CIS + Experience with scripts for Cisco devices +… more
    ManTech (08/16/24)
    - Save Job - Related Jobs - Block Source
  • Metrology Specialist

    Amentum (Crane, IN)
    …The work we complete for our customer is unique. What we seek is an engineer with a strong work ethic, desire to learn, good communication skills, and a willingness ... technical and non-technical + Assist in the development of processes and change controls for new and existing equipment + Have experience with Calibrated Equipment… more
    Amentum (09/24/24)
    - Save Job - Related Jobs - Block Source